SLX 330 Overview:

The SLX 330 Submersible Level Transducer is typically used to monitor the level of chemical tanks, streams, clearwells or other applications with low-to-moderate suspended solids.  [Applications with higher levels of suspended solids should consider using Contegra's SLX 130 or SLX 160.] 

The SLX 330 has a 1.0" diameter Type 316 Stainless steel housing and undulated stainless steel diaphragm.  The housing is suited for use in chemically aggressive applications. 

The SLX 330 -M provides an industry standard, loop-powered 4-20 mADC output and is available in poressure ranges as low as 1,0 PSI and up to 500 PSI.

The SLX 330 -M has a 9 VDC lift-off voltage (nominal) and operates on a supply voltage of up to 36VDC.  

The SLX 330 ’s sensor has a 0.5% typical accuracy.  The SLX 330 is pendent mounted (i.e. suspended) via its signal cable or may be mounted via the integral 1/2" MNPT fitting at the top of the sensor's housing. 

Documentation:

          SLX 330 Sales Literature:    10492-0001-01R SLX 330

          Small Signal Wiring Practices:     10417-0001-02 Wiring

          SLX Cable Hanger:     10179-0002-06 CH-SLX1c

          Testing a 2-Wire Loop:     Test 2-Wire Loop